Usage:
This machine is suitable for forming HIPS, PS, PVC, PET plastic sheet into variety of containers, boxes, dishes, trays,
bowls and lids
Paramters
| Forming length |
660-1200mm/26-47in (can change) |
| Sheet width |
610-760mm/24-28in (can change) |
| Forming height |
165mm(heightest) |
| Production speed |
200-600times/hour(depond on the shape of product and thickness of sheet) |
| Mould-up times |
one or two times(free to install) |
| Mould-up move |
Electromotion |
| Eject-die |
Shake to eject-die |
| Electric furnace rating power |
30 KW (Max) |
| Tempering device |
60 independent electronicses adjust press(one control one) |
| Motor power |
Whole machine 2.25 KW |
| Vacuum pump power |
3.0 KW |
| Cooling-water machine power |
3.37 KW |
| Power |
3 phase380V 50HZ |
| Air compressor |
15KW/20HP (Prepared by customer) |
| Dimension(L×W×H) |
(L)6600*(W)1450*(H)2800mm |
| Over packing size: |
3700 x 1660 x 2300mm,2600 x 1320 x 1450mm |
| Weight |
3000kg |
Workflow:
Carrying material(cylinder drives the chain to work)---heating(cylinder drives the electric furnace to lift in order to
make a proof)---pulling( cylinder drives the chain)----lifting the lower die,falling the upper die(cylinder drives)-vacuum forming(vacuum pump air admission )---cooling(gas drives the spray gun to work,electric machinery drives the air blowing)----drawing of patterns(gas drives)---pulling-cutting
This machine's single clips edge is 20mm.The fax forming area within 1200mm X 710 mm X 180mm (Length, Width,Height)
Feature:
1. Whole machine adopts PLC to control the production technical process, tail remember of modern computer
2. It adopts cylinder verticality pulling-sheet design. High speed to pull sheet to shorten the time to pull.As a result it saves eletricity to assure the quality of moulding.
3. Heater adopts infrared ceramic heating bricks.Each heating brick has itself solid regulator to control temperature,saving more than 50% electricity compared with the traditional machine.
4. Electric stove adopts enclosed heating device to uniform heat and it can reduce the heat cousumption.It is also
installed with manual switches to control the verticality lifting of the electric stove which can benefit the control and
assurance of during the production process.
5. The machine is equipped with wind cool, water cool chasis and high speed cold water spraying device to speed up moulding in order to assure the quality of mouldings.
6. Two-row chain with tine translate the sheet that assurance of high speed operation and stability and correctness.
7. Specially equipped with second vacuum, second mould-up, mould-down and the electric-driver adjustment
function.So it can make the products with extreme difficulties in processing mould easily and increase the quality of products.
Audited Supplier 
){kind=link}