| After-sales Service: | on Request |
|---|---|
| Warranty: | 12 Months |
| Automatic Grade: | Automatic |
| Application: | Cleaning, Detergent, Skin Care Products, Hair Care Products, Oil |
| Type: | Forming Filling Sealing Machine |
| Forming Species: | Bag Moulding |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Technical parameters | ||
| Bodyshell | Stainless steel 304 and hardened 520 aluminum oxidation treatment,45# steel chrome plating | |
| Packing weighting | 3-30gram | could fill 15gram ,and also 18gram Change volume : Just adjust in PLC of filling volume |
| Bag size | shape and size according to requirement | |
| Film width | Bottom film 330mm,cover-film 310mm | |
| speed | Three chambers 240ppm (actual speed depends on shape of pods ) | |
| Reject rate | <0.05% | |
| Sealing breakage rate | Less than 1/1000 | |
Packaging film penetration breakage rate |
When the material matches the packaging film(With a 90UM thick film and three leaf shapes as the standard) When the degree of stretch is less than 1.5 times, the breakage rate is 5/10000 When the degree of stretch is less than 2.0 times, the breakage rate is 5/1000 Under the above conditions, the damage rate of the packaging environment will increase. |
|
| Working method | Continuous, the pods produced by this machine can be directly connected to the secondary packaging |
|
| Filling method | 30 sets of ceramic piston pump independent metering |
|
| Temperature controller | PID intelligent control of the temperature of the heating part | |
| PVA film width | Bottom film>80um,cover film>70um | |
| Extending rate | >200% no leaking | |
| Workshop temperature | Use a constant temperature and humidity environment, the room temperature is around 25 degrees Celsius | |
| Workshop humidity |
Relative humidity between 40% RH and -50% RH |
|
| Usable area | 50m2(only pods machine,not including rear package equipment) | |
| Pod colour | Non-color ,color(red,green,blue,yellow etc.) | |
| Voltage | 380V 50HZ | |
| Precision | ±0.1ml | |
| Power | 15kw | |
| Weight | 2200kg | |
| Pneumatic | 0.6mpa 150L-200L/min(Air needs dry filtration) | |
| dimension | L3050xW1400xH1980mm | |
| 1.appearance and dimension of machine |  Length 3650mm,width 1200mm, Height 1900mm |
| 2.Model cavity | 1.aluminum alloy used for aviation hardened |
| 3.Handing film parts | 1.Auto Splicer unit ,one film is ran out ,other one film will connect film and operate automatically 2.device of supplying film extending ,width of touching film is around 250mm 3. same extending ,touching area is big ,friction is big and uniform without slipping . |
| 4.Finished product output | 1.Each belt has independent ribs in each row, the belt surface and the beads do not rub, and the pressure-proof strips (currently only US equipment and Dade equipment have this function) 2.The finished product exit has a clutch distribution split. |
| 5.Power | All the main actions are driven by one motor, and the other actions are converted into the same by the gearbox. The speed can be adjusted (changed) at any time without stopping, and the other (cutting) speed (don't wait) is synchronized immediately. (it is technical secret ,without picture) |
| 6.Cutting knife | The horizontal cutter is cut with a rotary hob and three knives are installed in one turn (consistent with US equipment) |
| 7.Sealing | 1.Sealable ,The coating roller is disassembled and cleaned 2.The surface of the sealing roller is made of imported thermal adhesive. (The temperature difference between the axis and the surface is small) |
| 8.Filling | Dosing volume could adjust via touch screen with the machine nonstop |
| 9.Hole | Cavity pumping holes: small and not easy to block |
| 10.other core technology |
Different packaging films are used at different times (can be adjusted without changing the speed of the whole machine (capacity) |
| 11.Users | Most domestic manufacturers, individual foreign users |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}